99热这里只有精品九九_无码专区中文字幕视频在线_亚洲欧美日韩综合久久久久_中文字幕aⅴ天堂在线

Welcome to the website of Baoji Zhongheng Instrument Co., Ltd. Tel:+86-917-3512881
Differential pressure transmitter Single crystal silicon pressure transmitter Electromagnetic flowmeter Capacitive pressure transmitter High precision pressure transmitter Intelligent pressure switch Diffused silicon pressure transmitter Flow switch Intelligent pressure transfer controller Thermometer

BXY65M150 Intelligent Pressure

Product code

 

Overview

? Provide constant voltage and current excitation
Product quotationProduct consulting在線訂購

Product introduction


1、 Overview
This series of pressure transmission controllers is an intelligent digital pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with a front end equipped with an isolation membrane filled oil pressure resistance pressure sensor. It is converted by high-precision A/D, processed by a microprocessor, displayed on site, and outputs one analog signal and 1-5 switching signals.
The pressure transmission controller is flexible to use, easy to operate, easy to debug, and safe and reliable. Widely used in industries such as hydropower, tap water, petroleum, chemical, mechanical, hydraulic, etc., for on-site measurement, display, and control of fluid medium pressure
2、 Characteristics
·Provide constant voltage and current excitation, which can be connected to various types of sensors (diffused silicon, ceramic capacitors, ceramic piezoresistive...)
·Output multiple standard analog signals (0/4-10/20mADC 0/1-5/10VDC)
·Can display four pressure values, four status parameters, and output standard analog signals
·Button calibration and on-site setting of various parameters for easy operation
·Multiple power supply options available (24VDC, 220VAC, 220VDC)
·1-5 relay outputs
·Ultra small temperature drift
·Applicable Φ 150 standard pressure gauge appearance
3、 Technical parameters




4、 Overall dimensions



Mechanical connection:
The pressure transmission controller can be connected through a pressure pipe joint (M20 * 1.5)
(Other sizes of connectors can be specified when ordering) Directly installed on the hydraulic pipeline. In critical applications such as severe vibration or impact, pressure pipe joints can be mechanically decoupled through micro hoses.
Note: When the range is less than 100KPa, it must be installed vertically
5.2 Electrical connections



To prevent the impact of electromagnetic interference, the following precautions should be taken:
The line connection should be as short as possible, using shielded wires
Try to avoid directly approaching the wiring of user devices or electrical and electronic devices that cause interference as much as possible
If micro hoses are used for installation, the casing must be separately grounded
6、 Setting functions
6.1 Output
The pressure transmission controller has five switching outputs. The corresponding output will switch when the pull-in value of the relay reaches and return when the pressure drops below the release value.
6.2 Setting the Relay









?